FNIRSI 2C53P 2C23T Digital Oscilloscope Multimeter Signal Generator Dual Channel

Description

Store Categories Store Categories Other Product View Details FNIRSI 2C53P Features 1.Measure weak signals at millivolt level, support 20M bandwidth limitation for power ripple measurement. 2. Efficient operation: switch the trigger mode according to the actual needs, so that every measurement is accurate, so that every detail jumps to the fore! 3.High-precision 4.5-digit true RMS multimeter: 4.5-digit high-precision, with full auto range 4.4.3 inch high definition touch screen, precision and operation display is very powerful 5. Real-time capture and display the changes of various measurement parameters to form a clear and concise data trend graph. Also has the ability to retain up to 5 groups of measurement data, at a glance! 6. Intelligent anti-burning, wrong gear does not burn the meter. Dual current fuse to prevent burning the meter safer Basic parameters: Backlight: backlight brightness can be set Power supply: Type-C (5V/2A) Battery: 4000mAh lithium battery (built-in) Oscilloscope parameters: Channel: dual-channel Real-time sampling rate: 250MSa/s Time base range: 10ns/div-10s/div Waveform display mode: YT/XY/Scroll Input impedance: 1MΩ Probe attenuation factor: 1x/10x Trigger type: rising edge/falling edge Trigger level range: 8 cells (positive and negative) Storage space: 13M Bandwidth: 50MHZ Storage depth: up to 64kByte Vertical Sensitivity: 10mv/div-10v/div Vertical Resolution: 8 bits Bandwidth Limit: Supports 20MHz limit Input coupling: AC/DC Peak voltage: ±400V Trigger mode: automatic/normal/single Measurement data: period, frequency, peak-to-peak, maximum value, minimum average value, RMS value, amplitude, duty cycle, pulse width Signal generator parameters: Different waveform output frequency: sine wave: 10MHZ, other waveforms 5MHZ Waveform frequency: 0-10MHz Waveform amplitude: 0.1V-3.0V Duty cycle of square wave: 0-100% Multimeter parameters: DC voltage: 1.9999V/19.999V/199.99V/1000.0V, accuracy ± (0.5%+3) AC voltage: 1.9999V/19.999V/199.99V/760.0V, accuracy ±(1%+3) DC current: 19.999mA/199.99mA/1.9999A/9.999A, accuracy ±(1.2%+3) AC Current: 19.999mA/199.99mA/1.9999A/9.999A, accuracy ±(1.5%+3) Resistance: 19.999MΩ/1.9999MΩ/199.99KΩ/19.999KΩ/, accuracy ±(1.5%+3) 1.9999KΩ/199.99Ω, accuracy ±(0.5%+3) Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF, accuracy ±(2.0%+5) 9.999mF/99.99mF, accuracy ±(5.0%+20) Temperature: -55~1300℃/-67~2372℉, accuracy ±(2.5%+5) Diode/On/Off: √ List 1 x Tester 1 x Instruction Manual 2 x P6100 Probe 1 x Type-C Data Cable 1 x Multimeter Pen 1 x Alligator Clip Probe FNIRSI 2C23T Features 1. Dual-channel 3-in-1 digital oscilloscope: multimeter + oscilloscope + signal generator 2.Dual-channel 2X10MHz bandwidth, isolated channels are independent of each other to avoid interference between them, more accurate signal detection 3. Oscilloscope performance: hardware architecture and desktop computer with the same ARM + FPGA + high-speed ADC program, high cost, non-general CPU direct mining program, trigger system is powerful, with super waveform capture capability, waveform details are not lost 4. One-key measurement: with a complete range of trigger modes: automatic, single, conventional equipped with efficient one-key automatic adjustment, without the need for cumbersome adjustment can display the measured signal waveforms 5. Built-in double insurance tube intelligent anti-burn overload does not burn the table: intelligent anti-burn power measurement is safer, novice can also easily measure! Overview Model: 2C23T Screen: 2.8-inch true color screen Resolution: 320 * 240 Charging: TYPE-C (5V/1A) Battery: 3000mAh lithium battery Support function: Oscilloscope, signal generator, digital multimeter (see function parameters) Standby time: 8 hours (laboratory theory maximum) Multimeter specifications DC voltage: 9.999V/99.99V/999.9V, accuracy: ±(0.5%+3) AC voltage: 9.999V/99.99V/750.0V, accuracy: ±(1%+3) DC current: 9999uA/99.99mA/999.9mA/9.999A, accuracy: ±(1.2%+3) AC Current: 9999uA/99.99mA/999.9mA/9.999A, Accuracy: ±(1.5%+3) Resistance: 9.999MΩ/999.9KΩ199.99KΩ19.999KΩ/999.9Ω, accuracy: ±(0.5%+3) 99.99MΩ, Accuracy: ±(1.5%+3) Capacitance: 999.9uF199.99uF/9.999uF/999.9nF/99.99nF9.999nF, Accuracy: ±(2.0%+5) 9.999mF/99.99mF, accuracy: ±(5.0%+20) Temperature: (-55~1300℃/(-67~2372℉), Accuracy: ±(2.5%+5) Diode: √ On-off: √ Firewire detection: √ Oscilloscope Specifications Channel: Dual Channel Sampling rate: 50M Analog bandwidth: 10M (dual-channel independent 10M) Memory depth: 32kb Input impedance: 1MΩ Time base range: 50ns-10s Vertical sensitivity: 20mV/div-10V/div (X1 step) Maximum measurement voltage: ±400V Trigger mode: automatic, normal, single Trigger type: rising edge, falling edge Display Mode: YT/Scrolling Coupling: AC/DC Waveform Screenshot Saving: Support View waveforms on computer: Support Function Signal Generator Specifications Channel: single channel Frequency: 1Hz-2MHz Amplitude: 0.1-3 Package List 1 x Main unit 1 x Instruction Manual 2 x Probe 1 x Alligator Clip Probes 1 x Multimeter Pen Cable 1 x Type-C Charging Cable Shipping Policy Payment Method Returns Policy Shipping Policy Payment Method Returns Policy Home Payment Shipping About us Contact us Copyright©2018 datacaciques Home Payment Shipping About us Contact us Store Categories Store Categories Other Product View Details FNIRSI 2C53P Features 1.Measure weak signals at millivolt level, support 20M bandwidth limitation for power ripple measurement. 2. Efficient operation: switch the trigger mode according to the actual needs, so that every measurement is accurate, so that every detail jumps to the fore! 3.High-precision 4.5-digit true RMS multimeter: 4.5-digit high-precision, with full auto range 4.4.3 inch high definition touch screen, precision and operation display is very powerful 5. Real-time capture and display the changes of various measurement parameters to form a clear and concise data trend graph. Also has the ability to retain up to 5 groups of measurement data, at a glance! 6. Intelligent anti-burning, wrong gear does not burn the meter. Dual current fuse to prevent burning the meter safer Basic parameters: Backlight: backlight brightness can be set Power supply: Type-C (5V/2A) Battery: 4000mAh lithium battery (built-in) Oscilloscope parameters: Channel: dual-channel Real-time sampling rate: 250MSa/s Time base range: 10ns/div-10s/div Waveform display mode: YT/XY/Scroll Input impedance: 1MΩ Probe attenuation factor: 1x/10x Trigger type: rising edge/falling edge Trigger level range: 8 cells (positive and negative) Storage space: 13M Bandwidth: 50MHZ Storage depth: up to 64kByte Vertical Sensitivity: 10mv/div-10v/div Vertical Resolution: 8 bits Bandwidth Limit: Supports 20MHz limit Input coupling: AC/DC Peak voltage: ±400V Trigger mode: automatic/normal/single Measurement data: period, frequency, peak-to-peak, maximum value, minimum average value, RMS value, amplitude, duty cycle, pulse width Signal generator parameters: Different waveform output frequency: sine wave: 10MHZ, other waveforms 5MHZ Waveform frequency: 0-10MHz Waveform amplitude: 0.1V-3.0V Duty cycle of square wave: 0-100% Multimeter parameters: DC voltage: 1.9999V/19.999V/199.99V/1000.0V, accuracy ± (0.5%+3) AC voltage: 1.9999V/19.999V/199.99V/760.0V, accuracy ±(1%+3) DC current: 19.999mA/199.99mA/1.9999A/9.999A, accuracy ±(1.2%+3) AC Current: 19.999mA/199.99mA/1.9999A/9.999A, accuracy ±(1.5%+3) Resistance: 19.999MΩ/1.9999MΩ/199.99KΩ/19.999KΩ/, accuracy ±(1.5%+3) 1.9999KΩ/199.99Ω, accuracy ±(0.5%+3) Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF, accuracy ±(2.0%+5) 9.999mF/99.99mF, accuracy ±(5.0%+20) Temperature: -55~1300℃/-67~2372℉, accuracy ±(2.5%+5) Diode/On/Off: √ List 1 x Tester 1 x Instruction Manual 2 x P6100 Probe 1 x Type-C Data Cable 1 x Multimeter Pen 1 x Alligator Clip Probe FNIRSI 2C23T Features 1. Dual-channel 3-in-1 digital oscilloscope: multimeter + oscilloscope + signal generator 2.Dual-channel 2X10MHz bandwidth, isolated channels are independent of each other to avoid interference between them, more accurate signal detection 3. Oscilloscope performance: hardware architecture and desktop computer with the same ARM + FPGA + high-speed ADC program, high cost, non-general CPU direct mining program, trigger system is powerful, with super waveform capture capability, waveform details are not lost 4. One-key measurement: with a complete range of trigger modes: automatic, single, conventional equipped with efficient one-key automatic adjustment, without the need for cumbersome adjustment can display the measured signal waveforms 5. Built-in double insurance tube intelligent anti-burn overload does not burn the table: intelligent anti-burn power measurement is safer, novice can also easily measure! Overview Model: 2C23T Screen: 2.8-inch true color screen Resolution: 320 * 240 Charging: TYPE-C (5V/1A) Battery: 3000mAh lithium battery Support function: Oscilloscope, signal generator, digital multimeter (see function parameters) Standby time: 8 hours (laboratory theory maximum) Multimeter specifications DC voltage: 9.999V/99.99V/999.9V, accuracy: ±(0.5%+3) AC voltage: 9.999V/99.99V/750.0V, accuracy: ±(1%+3) DC current: 9999uA/99.99mA/999.9mA/9.999A, accuracy: ±(1.2%+3) AC Current: 9999uA/99.99mA/999.9mA/9.999A, Accuracy: ±(1.5%+3) Resistance: 9.999MΩ/999.9KΩ199.99KΩ19.999KΩ/999.9Ω, accuracy: ±(0.5%+3) 99.99MΩ, Accuracy: ±(1.5%+3) Capacitance: 999.9uF199.99uF/9.999uF/999.9nF/99.99nF9.999nF, Accuracy: ±(2.0%+5) 9.999mF/99.99mF, accuracy: ±(5.0%+20) Temperature: (-55~1300℃/(-67~2372℉), Accuracy: ±(2.5%+5) Diode: √ On-off: √ Firewire detection: √ Oscilloscope Specifications Channel: Dual Channel Sampling rate: 50M Analog bandwidth: 10M (dual-channel independent 10M) Memory depth: 32kb Input impedance: 1MΩ Time base range: 50ns-10s Vertical sensitivity: 20mV/div-10V/div (X1 step) Maximum measurement voltage: ±400V Trigger mode: automatic, normal, single Trigger type: rising edge, falling edge Display Mode: YT/Scrolling Coupling: AC/DC Waveform Screenshot Saving: Support View waveforms on computer: Support Function Signal Generator Specifications Channel: single channel Frequency: 1Hz-2MHz Amplitude: 0.1-3 Package List 1 x Main unit 1 x Instruction Manual 2 x Probe 1 x Alligator Clip Probes 1 x Multimeter Pen Cable 1 x Type-C Charging Cable Shipping Policy Payment Method Returns Policy Shipping Policy We will arrange shipping for you within 24 Hours after payment cleared except the holidays. -We ship items to Worldwide. Thank you! -we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries. Payment Method We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase. 2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country. Returns Policy 1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase. 2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse. 3. Please include your eBay ID and item number with any email requests.