DX80A Goldsmith Welding Spark Machine for Jewelry and Metal Crafting
$ 137.27
Description
DX80A high-power laser spot welding machine handheld pulse spot welding machine butt welding machine jewelry gold tool Adjustable pulse spot welding machine (Dingxing butt welding machine) Power supply: AC220V-110V Power: 200W/300W/400W Welding current: 0.5-30A continuously adjustable (pulse ignition) (0.5-30A) (0.5-50A) (0.5-80A) Standard accessories: power cord, foot switch, work clamp, tungsten needle holder, tungsten needle/instructions (standard accessories are not covered by the warranty) Product introduction: The spot welding machine can be used for the rapid welding of platinum, gold, K gold, silver, steel, ring mouth, melon buckle, precision welding of thin wires, and direct welding without solder powder. The solder joints are smooth. 1. Using the principle of plasma high-frequency discharge, a molten pool is instantly formed at the metal weld 2. Adjust the output power according to different sizes of wires 3. The welded workpiece is smooth, firm, fast, and efficient Technical Parameters: Power supply: 220V 50/60HZ Maximum current can reach: 80A Dimensions: 310*165*140MM Installation and debugging: 1.The electrode clamp is connected to the output negative pole, and the electrode holder is connected to the output positive pole. 2.The tungsten needle can be sharpened on the grinder and work using the principle of tip discharge. 3.Tungsten needle diameter 1.5mm Steps: 1.Turn on the power and turn on the power switch 2. Adjust the power knob, divided into coarse adjustment and fine adjustment. The scale value can be adjusted arbitrarily according to work requirements 3. Clamp the workpiece with tweezers. The workpiece interface is aligned with the tungsten needle (the best distance is 5mm) and the workpiece cannot be touched. 4. Step on the foot switch with your foot. (Remove your foot). Spot welding is complete. Precautions: 1. The foot can not be stepped on the foot switch for a long time, step on it and remove it immediately. 2. This machine is precise, please use it with care. 3. The flash is harmful to the eyes, please take protective measures when using it. 4 When stepping on the foot switch, do not touch the tungsten needle and the metal part of the tweezers at the same time, otherwise there will be a needle puncture feeling. 5 Non-professionals please do not disassemble and repair, there is high voltage inside. If you are not 100% happy with your purchase, please contact us. Please don't directly opened a request or case without informing us,We are committed to 100% customer satisfaction and we can solve any problem for you, provided you contact us. All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. If the machine is returned without any damage, the return shipping cost must be borne by the buyer and the original shipping cost will be deducted from the refund. Returns that are the result of our seller's error,Buyer will receive a full refund of the item as well as shipping charges. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with express, remind our related department to pay much more attention to packaging later on. Hope for your understanding. After receiving the machine and inspecting all its accessories, we will arrange a refund for you. After the refund, eBay will process your refund for you. Please receive the refund promptly.
