Universal Car Dash Cam Mirror Mount Kit for Rear View Installation
$ 9.53
Description
Dash Cam Mirror Mount Kit for Universal Car Rear View Universal Mirror Holder (US WAREHOUSE - FAST SHIP USA) Where exactly should you mount your dashcam? This is a very important question, one that is fundamental to vehicle owners with dashcams. This depends on a few questions. Yes, especially given the name, it may seem that installing a dashcam on the dashboard is the most logical thing to do, but that can directly interfere with the view and make for unsafe driving. Barring the dashboard, the second and most common option is to mount somewhere on the windshield. Now, that is something ideally suitable, depending of course where it is placed. A lot of drivers do prefer to install dashcams on the front windshield because it allows them to record a clear unobstructed view of the road ahead, and doesn’t interfere with the view whatsoever when driving. The best position is right down the center of the windshield, about a few inches down from the headliner. If your dashcam comes with Anumit mirror mount, you should leave enough space so that the device can be easily installed. Which location would be best? Ideally, just behind the rear view mirror. This is the one area of the windshield that is already usually blocked. So, if you install just behind the rear view mirror, you don’t block any additional viewing area, which is perfect. Also, for best results in terms of view angle, when installing take into consideration that the camera is placed right under the rear view mirror handle. This is more or less the center of the windshield. This will ensure that the central view looking out of the windshield will cover the all of the road in front as well as the bonnet of the vehicle you are driving, which is key if you have a car camera with a relatively cheap dash cam with a low view angle of say 140° or less. Come with 16 different joints, suitable for 95% dash cam. Never Fall Down From The Windshield. Strong Pipe Mount 360° Rotation Freedom Anti-Skidding and Protectiveness NOTE: Only compatible with domestic vihicles with mirrors that have a cylindrical shapped stem at least 0.4" long Widely Applicable models Come with 16 different joints, suitable for AUKEY, Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.(Including but not limited to). Easy to install and remove Tool-less and easy to install, the product can be installed or removed within minutes thanks to the thumb screws Easy angle adjustment Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need. Specification: Material: Plastic and rubber Weight: 4.9 oz Clamping Diameter range: 0.5- 2.6 inches Ultra-slim 9.20mm design to suit 94% car rear view mirror. Real 360-degree rotation design, adjust to any angle you need. Solid, high-quality workmanship way Stable and secure mounting Position fixing with practical locking nut All connectors and controls remain accessible . Sobre este artículo ☑️ Compatibilidad perfecta : Nuevo kit de 🔧 16 juntas diferentes adecuado para cámara de salpicadero del 🚘 99% (no todas) , cámara de acción 🎥, GPS 📍 y mucho más. 📏 El diámetro de la bola del soporte es de 0.63 pulgadas . ⚠️ Para una instalación fácil, asegúrate de que la parte trasera del espejo del coche tenga más de 0.4 pulgadas de espacio libre . ☑️ El mejor compañero de cámara de salpicadero : Monta tu cámara justo detrás del centro del parabrisas 🪟 para una conducción más segura 🛡️. 📷 Permite grabar una visión clara y sin obstrucciones del camino, sin interferir con el campo de visión del conductor. ☑️ Soporte de tubo fuerte : 🔧 Sin herramientas necesarias, fácil de instalar y quitar. 🚲 Se ajusta a espejos retrovisores de coche, manillares de bicicleta/motocicleta 🏍️ o cualquier tubo redondo con diámetro de 0.5 a 2.6 pulgadas . 📦 Incluye dos tornillos largos y dos cortos . ⚠️ Verifica las imágenes de referencia antes de comprar 🖼️. ☑️ Libertad de rotación de 360° : 🔄 Rótula ajustable con rotación completa de 360 grados , se adapta fácilmente a cualquier ángulo 🧭 — ya sea horizontal o vertical , todo está bajo tu control 🎯. ☑️ Antideslizante y protección : 🔒 Fijación con tuerca de bloqueo, construcción duradera 💪 que evita resbalones y roturas , además de resistencia al calor ☀️. 🔐 La cámara se mantiene firme y no se cae del parabrisas , incluso en trayectos largos o calurosos 🛣️🔥. 📦 Ships from U.S. Warehouse 🚀 Fast & Free Shipping 🔁 30-Day Free Return Policy The Dash Cam Mirror Mount Kit is a universal rear view mirror holder designed specifically for dash cams. The black-colored kit comes with a rear view mirror mounting type, making it easy to securely attach your camera for a clear view while driving. The product dimensions are 3 x 2 x 1 inches and weighs 5 ounces, ensuring a compact and lightweight design that fits seamlessly into your car's interior. Enjoy quick delivery from the USA warehouse and hassle-free returns within 30 days of purchase. Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase
Great quality very good. Made good condition. The value is great appearance is everything that you want but I love it. Thank you for selling this item. Very satisfied. 
Excellent +++++++++++Just as described , credit to E-Bay community be buying again from this seller highly recommended
Lighting fast delivery, excellent value, great communication first class all the way 👍 top notch.
Related products
Radar Straight Power Cord Compatible with Uniden R3 R7 R1 Radar Detector, for Pa
$ 8.889" Car Stereo Radio Apple Carplay MP5 BT 32G For VW Volkswagen Jetta Passat polo
$ 45.41Car Stereo for Toyota 4Runner 2014-2019 with Wireless CarPlay Android Auto
$ 79.2Radio Car Stereo for Chevrolet/GMC/Buick Built in Wireless Carplay Android Auto
$ 40.13