REOLINK Accessory Rechargeable Battery Designed Go/Go Plus
$ 28.25
Description
High-Capacity Battery: Reolink Go Ultra/Go Plus will switch to standby mode to save battery when no movement is detected. The high-capacity rechargeable battery will last for around two months in standby-mode or about 500 minutes under active access for live feed/recordings. The battery is compatible with Reolink Go Ultra/Go Plus only. Charging Method: You can charge the battery via a DC 5V 2A USB power adapter or the Reolink solar panel. Product Description Specifications: · Dimension: 74.2 x 41.59 x 39.14 mm · Weight: 166g Note: The battery life of Reolink Go may vary based on different mobile network service providers, signal strength, and other factors. It’s recommended to go for AT&T in the US, and T-Mobile/Vodafone/O2/EE in the EU, to have optimal battery life. If you use SIM cards from other mobile network service providers, it’s strongly advised to add the Reolink Solar Panel. *Standby mode: Reolink Go will switch to standby mode to minimize battery usage when: No access to the camera via Reolink App No motion detection triggered by the PIR sensor. Q: Can I Charge the Battery of Reolink Go Separately? A: Reolink Go comes with rechargeable battery which can be removed from the camera. So you can charge the battery separately. The charger of the camera is a USB adapter (DC 9/5Volts) which is commonly used for smartphones (not included in the box). A micro-USB cable is included in the box. And you can follow the tips to charge the battery separately: Open the back cover by twisting it a little, then pull out the battery. Connect the battery with the USB adapter via a USB cable and plug it into the electrical outlet. Q: Can I Replace the Battery for my Reolink Go? A: Reolink Go comes with rechargeable batteries. The back cover with the batteries inside for Reolink Go can be removed from the camera body, so the battery/back cover of Reolink Go is replaceable.
