Car Body Plastic Push Pin Fasteners Panel Trim Moulding Auto Clips 625Pcs

$ 12.54

Performance Part: No Universal Fitment: No OE/OEM Part Number: / Shipping: Free in USA UPC: Does not apply Country/Region of Manufacture: Unknown Type: Bumper Clips Brand: Unbranded Hole Fitment Size: 8mm / 0.3 inches Interchange Part Number: Under Engine Splash Guard Rivet Fastener Clips Other Part Number: Plastic Push-Type Bumper Retainer Clip Color: Black gtin13: Does not apply Placement on Vehicle: Front, Left, Lower, Right, Rear, Upper Material: Plastic Manufacturer Part Number: Bumper Clips Retainer Head Diameter(max.): 20mm/0.78" Fitment Type: Direct Replacement Features: Easy Installation Product Name: Clips/Rivets/Fastener Total Length: 25mm/0.98" Manufacturer Warranty: 2 Years

Description

Specification: Product Name: Plastic Rivet Material: Plastic Color: Black Max Diameter: 20mm/0.78" Package Content: Quantity: 625x Plastic Rivets+1xRemover Use Range: Commonly used in auto parts side skirts, bumpers, car fenders, hoods, door trims, interior trims and various trims. They can be used in cars, trucks, motorcycles, buses, trains, airplanes, caravans, etc. Car Body Plastic Push Pin Fasteners Panel Trim Moulding Auto Clips 625Pcs Specification: Product Name: Plastic Rivet Material: Plastic Color: Black Max Diameter: 20mm/0.78" Package Content: Quantity: 625x Plastic Rivets +1xRemover Use Range: Commonly used in auto parts side skirts, bumpers, car fenders, hoods, door trims, interior trims and various trims. They can be used in cars, trucks, motorcycles, buses, trains, airplanes, caravans, etc. Feature: These universal plastic clips will fit on most of the auto parts with an 8mm hole, please check the replace hole size before placing an order. The push pins will be used for holding on radiator yoke, fender, fender flare, bumper, splash shield, retainer, mud flap, grille, etc. Very easy to install and remove easier with a rivet remove tool ( rivet remove tool not included). The sturdy black material will hold up the fender, bumper, splash shield, splash guard, retainer tight and well. Package includes 120 pieces fasteners which will be enough for you to use. How to Install: Check the hole size of your car, make sure the hole size is 8mm. Remove the old clips with a remover tool from your car Put the two parts of the new clips together Push the clips into the hole Descriptions: Rivet post pressure expands legs for fast and permanent fastening. Used widely for car fender, bumper, door or other car suface. Push in type, are made of the plastic material, fit 8mm diameter hole. Insert the female part into hole, push the male part to the bottom, closed position. To uncouple the two parts, unhook the male part by using a tool under its head. Note: Before placing order,please check the size first. Package Included: 30pcs × (10 mm) aperture head diameter: 20mm stem length: 13mm 90pcs × (6.25 mm) hole size head diameter: 15.2mm stem length: 11mm 90pcs × (6 mm) aperture head diameter: 15.2mm stem length: 12mm 70pcs × (7 mm) aperture head diameter: 13.8mm stem length: 11.4mm 25pcs × (8 mm) aperture head diameter: 16mm stem length: 10mm 25pcs × (9 mm) aperture head diameter: 15mm stem length: 12mm 30pcs × (6 mm) aperture head diameter: 15mm stem length: 13.7mm 50pcs × (6.2 mm) aperture head diameter: 13.8mm stem length: 10mm 20pcs × (9 mm) aperture head diameter: 18.2mm stem length: 16mm 50pcs × (5 mm) aperture head diameter: 10mm stem length: 12mm 20pcs × (7mm) aperture head diameter: 20mm stem length: 10.5mm 30pcs × (8 mm) aperture head diameter: 19mm stem length: 8.5mm 25pcs × (8 mm) aperture head diameter: 20mm stem length: 13 mm 20pcs × (7.8 mm) aperture head diameter: 20mm stem length: 10mm 30pcs × (9 mm) aperture head diameter: 19.7mm stem length: 8.7mm 20pcs × (9 mm) aperture head diameter: 17.7mm stem length: 27.6mm 1 x fastener removal Item Specifics Other Part Number Plastic Push-Type Bumper Retainer Clip Head Diameter(max.) 20mm/0.78" Interchange Part Number Under Engine Splash Guard Rivet Fastener Clips Manufacturer Part Number Bumper Clips Retainer Brand Unbranded Product Name Clips/Rivets/Fastener Total Length 25mm/0.98" Color Black Features Easy Installation Placement on Vehicle Front Left Lower Right Rear Upper Type Bumper Clips Material Plastic Fitment Type Direct Replacement Hole Fitment Size 8mm / 0.3 inches Shipping Free in USA OE/OEM Part Number / Country/Region of Manufacture Unknown Performance Part No Universal Fitment No Manufacturer Warranty 2 Years Payment 1. Instant PayPal payment is the preferred method of payment. We also accept payment via PayPal, DebitCard, Visa, MasterCard, Discover. 2. Before payment,Please keep the consistency of Paypal address and ebay address. 3. Quantity orders are welcome! Shipping 1. All items will be shipped in 24 hours after receiving your payment . 2. We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver. Returns 1. We offer free return & money back guarantee. If you are not satisfied with your purchase for any reasons, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.) 2. If you don't return goods within 60 days from date of purchase, your right to cancel will be revoked. Any items damaged because of incorrect installation will not be refunded. Please contact us for return or troubleshooting help prior to returning any products. Contact Us 1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues. 2. We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral or negative feedback, so that we can satisfactorily address your concerns. FAQ 1. Can you tell me when my order will be shipped? Actually we will ship the item within 1 business day after receiving orders. But USPS need to take longer time to update tracking info and arrange delivery during the challenging time for now. If your order was not shipped more than 3 business days, please contact us with your order number to get quick support. 2. My item has not arrived, what's taking so long? Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap. 3. Do you ship to Canada, United Kingdom, Australia, etc.? Unfortunately, we could only ship to United States (Domestic shipment) at the moment. 4. I bought the wrong items/ the items were not compatible with my vehicle. Please contact us via ebay message to get quick support. DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Hot Item 100PCS For Ford Fender Bumper Hood Moulding Side Garnish Grille Clip Retainer USD 10.44 Universal 4PCS Car Flaps Mud Guards Splash Front Rear for Auto Car Accessories USD 25.09 Fuel Door Gas Cap Hatch Cover & Trim Moulding For Ford 2015-2019 Transit-250 USD 13.29 40x Engine Under Cover Splash Shield Guard Body Bumper Bolts U-nut Clip Fastener USD 9.49 Black Rubber Auto Seal Car Weather Window Strip Trim Lock Trunk Double Layer 5M USD 11.99 New List Item Front Bumper Silver Grille Grill Trim For Toyota Camry LE XLE 2021-23 TO1039244 USD 31.09 ABS Wheel Sensor Speed For 2007-16 GMC 08-17 Acadia Buick Rear Enclave RH and LH USD 38.09 Daytime Running Light LED DRL Module Unit For Audi A7 Quattro 2014-17 4G0907397G USD 31.09 Door Handle Release Switch Fit for Chevrolet 2005-2013 C6 Cadillac Corvette USD 21.09 Master Window Button Switch Cover Cap For Benz GLE500 GLE300d GLE550 GLE400 AMG USD 13.09 Excellent Delivery Car Body Plastic Push Pin Fasteners Panel Trim Moulding Auto Clips 625Pcs Specification: Product Name: Plastic Rivet Material: Plastic Color: Black Max Diameter: 20mm/0.78" Package Content: Quantity: 625x Plastic Rivets +1xRemover Use Range: Commonly used in auto parts side skirts, bumpers, car fenders, hoods, door trims, interior trims and various trims. They can be used in cars, trucks, motorcycles, buses, trains, airplanes, caravans, etc. Feature: These universal plastic clips will fit on most of the auto parts with an 8mm hole, please check the replace hole size before placing an order. The push pins will be used for holding on radiator yoke, fender, fender flare, bumper, splash shield, retainer, mud flap, grille, etc. Very easy to install and remove easier with a rivet remove tool ( rivet remove tool not included). The sturdy black material will hold up the fender, bumper, splash shield, splash guard, retainer tight and well. Package includes 120 pieces fasteners which will be enough for you to use. How to Install: Check the hole size of your car, make sure the hole size is 8mm. Remove the old clips with a remover tool from your car Put the two parts of the new clips together Push the clips into the hole Descriptions: Rivet post pressure expands legs for fast and permanent fastening. Used widely for car fender, bumper, door or other car suface. Push in type, are made of the plastic material, fit 8mm diameter hole. Insert the female part into hole, push the male part to the bottom, closed position. To uncouple the two parts, unhook the male part by using a tool under its head. Note: Before placing order,please check the size first. Package Included: 30pcs × (10 mm) aperture head diameter: 20mm stem length: 13mm 90pcs × (6.25 mm) hole size head diameter: 15.2mm stem length: 11mm 90pcs × (6 mm) aperture head diameter: 15.2mm stem length: 12mm 70pcs × (7 mm) aperture head diameter: 13.8mm stem length: 11.4mm 25pcs × (8 mm) aperture head diameter: 16mm stem length: 10mm 25pcs × (9 mm) aperture head diameter: 15mm stem length: 12mm 30pcs × (6 mm) aperture head diameter: 15mm stem length: 13.7mm 50pcs × (6.2 mm) aperture head diameter: 13.8mm stem length: 10mm 20pcs × (9 mm) aperture head diameter: 18.2mm stem length: 16mm 50pcs × (5 mm) aperture head diameter: 10mm stem length: 12mm 20pcs × (7mm) aperture head diameter: 20mm stem length: 10.5mm 30pcs × (8 mm) aperture head diameter: 19mm stem length: 8.5mm 25pcs × (8 mm) aperture head diameter: 20mm stem length: 13 mm 20pcs × (7.8 mm) aperture head diameter: 20mm stem length: 10mm 30pcs × (9 mm) aperture head diameter: 19.7mm stem length: 8.7mm 20pcs × (9 mm) aperture head diameter: 17.7mm stem length: 27.6mm 1 x fastener removal Item Specifics Other Part Number : Plastic Push-Type Bumper Retainer Clip Head Diameter(max.) : 20mm/0.78" Interchange Part Number : Under Engine Splash Guard Rivet Fastener Clips Manufacturer Part Number : Bumper Clips Retainer Brand : Unbranded Product Name : Clips/Rivets/Fastener Total Length : 25mm/0.98" Color : Black Features : Easy Installation Placement on Vehicle : Front Left Lower Right Rear Upper Type : Bumper Clips Material : Plastic Fitment Type : Direct Replacement Hole Fitment Size : 8mm / 0.3 inches Shipping : Free in USA OE/OEM Part Number : / Country/Region of Manufacture : Unknown Performance Part : No Universal Fitment : No Manufacturer Warranty : 2 Years Payment Shipping Returns Contact Us FAQ 1. Instant PayPal payment is the preferred method of payment. We also accept payment via PayPal, DebitCard, Visa, MasterCard, Discover. 2. Before payment,Please keep the consistency of Paypal address and ebay address. 3. Quantity orders are welcome! 1. All items will be shipped in 24 hours after receiving your payment . 2. We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver. 1. We offer free return & money back guarantee. If you are not satisfied with your purchase for any reasons, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.) 2. If you don't return goods within 60 days from date of purchase, your right to cancel will be revoked. Any items damaged because of incorrect installation will not be refunded. Please contact us for return or troubleshooting help prior to returning any products. 1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues. 2. We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 1. Can you tell me when my order will be shipped? Actually we will ship the item within 1 business day after receiving orders. But USPS need to take longer time to update tracking info and arrange delivery during the challenging time for now. If your order was not shipped more than 3 business days, please contact us with your order number to get quick support. 2. My item has not arrived, what's taking so long? Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap. 3. Do you ship to Canada, United Kingdom, Australia, etc.? Unfortunately, we could only ship to United States (Domestic shipment) at the moment. 4. I bought the wrong items/ the items were not compatible with my vehicle. Please contact us via ebay message to get quick support. All rights reserved. On Feb 25, 2025 at 07:53:54 PST, seller added the following information: