ASP Digital FM VHF UHF Dual Band Mobile Transceiver Support Auto/Manual Modes #M

Description

Description FTM-510DR ASP Digital FM VHF UHF Dual Band Mobile Transceiver Support Auto/Manual Modes Description: - The FTM-510DR/E ASP shares the core feature set of the FTM-500DR with an enhanced new Super-DX and ASP (Audio Digital Signal Processor Unit). - Super-DX: When the received signal is weak, the sensitivity of the RF amplifier can be increased by activating the Super-DX function in both C4FM digital/ FM analog modes. - ASP (Audio Digital Signal Processor): When operating in FM analog mode, the ASP can also be activated in addition to the Super-DX. By digitally processing the received FM audio to remove noise, the ASP ensures reliable and comfortable audio quality for weak signals. This helps to expand the communication range. - For intuitive and effortless operation, the PMG and MAG functions of the FTM-510DR ASP have been improved. - PMG (Primary Memory Group): up to 5 VFO or memory channel frequencies can be assigned to the PMG (Primary Memory Group) and monitored. The reception status of the PMG channels is displayed with an orange/ gray-colored bar graph in the PMG screen. When a signal disappears, the bar graph color changes from orange to gray in real time. With the FTM-510DR ASP, the gray bar graphs (historical received signals) automatically fade out 2 seconds after a signal is lost. With the FTM-500DR, the gray bar graphs remain until they are manually reset by pressing the DIAL knob. - Other practical differences of the PMG function between the FTM-510DR ASP and the FTM-500DR are: Updated PMG in the FTM-510DR ASP AUTO Mode: - The PMG channel manually selected to transmit is always scanned and received. Other PMG channels are also scanned and a channel with a signal can be received and heard at the same time. - The transmit channel is selectable by rotating the DIAL knob in the PMG screen. MANUAL Mode: - The PMG channel manually selected to transmit is always scanned and received. Other PMG channels are also scanned and shown in bar graph on display, but audio does not heard. - The transmit channel is selectable by rotating the DIAL knob in the PMG screen. MAG (Memory Auto Grouping): - In addition to Memory channels which can be recalled by each band, the FTM-510DR ASP has the new “My Group” feature which permits selection of any memory channel regardless of band. - For the current FTM-500DR users, the updated PMG function and “My Group” in MAG feature will be available by updating the firmware if it is preferable. The applicable firmware will be released by the end of February 2025. - The FTM-510DR ASP does not include the built-in Bluetooth unit. By installing the optional Bluetooth unit – BU-5, hands-free operation is available with the SSM-BT20 or a commercially available Bluetooth product. Specification: - Frequency range: Transmitting: 144 - 148MHz or 430 - 440MHz Receiving: 108 - 137MHz (aviation band); 137 - 174MHz (144MHz amateur/VHF band); 174 - 400MHz; 400 - 480MHz (430MHz amateur/UHF band); 480 - 550MHz - Channel step: 5/6.25/8.33/10/12.5/15/20/25/50/100kHz (8.33kHz: for aviation band only) - Transmitting mode: F1D, F2D, F3E, F7W - Frequency stability: ±2.5ppm (-20℃ to +60℃) - Antenna impedance: 50ohms - Power supply voltage: rated value 13.8VDC, negative connecting to GND - Current consumption: about 0.5A (receiving); 11A (55W transmitting, 144MHz); 10A (50W transmitting, 430MHz) - Working temperature range: -20℃ to +60℃ - Product size: Host: 139 x 42 x 132mm (excluding the fan size) Controller: 156 x 64 x 58.6mm (excluding the knob size) - Net weight: about 1.4kg (including host, controller, control cable weight) Transmitting: - RF output power: 55W (144MHz), 50W (430MHz)/25W/5W - Modulation type: F1D, F2D, F3E: variable impedance modulation F7W: 4FSK (C4FM) - Maximum frequency offset: ±5kHz - Stray radiation: at least lower than 60dB - Microphone impedance: 2kohms - DATA insertion hole impedance: 10kohms Receiving: - Circuit type: double superheterodyne - Mid frequency: First: 56.75MHz; second: 450kHz (main frequency band) First: 55.85MHz; second: 450kHz (secondary frequency band) - Sensitivity: 0.8μV TYP: for 10dB SN (108-137MHz, @AM) 0.2μV: for 12dB SINAD (137-150MHz, @FM) 0.25μV: for 12dBSINAD (150-174MHz, @FM) 0.3μV TYP: for 12dB SINAD (174-222MHz, @FM) 0.25μV TYP: 12dB SINAD (222-300MHz, @FM) 0.8μV TYP: 10dBSN (300- 336MHz, @AM) 0.25μV TYP: 12dB SINAD (336-420MHz, @FM) 0.2μV: for 12dB SINAD (420-470MHz, @FM) 0.2μV TYP: 12dB SINAD (470-550MHz, @FM) 0.19μV TYP: BER 1% (digital mode) - Selectivity: NFM, AM 12kHz / 30kHz (-6dB/-60dB) - AF output: 6W (8Ω, THD10%, 13.8V) for front panel speakers; 3W (8Ω, THD10%, 13.8V) for built-in speakers; 3W (8Ω, THD10%, 13.8V) for external speakers - AF output impedance: 8Ω - Secondary radio wave intensity: 4nW and below Package Included: - 1 x Transceiver - 1 x Mounting Bracket - 1 x 3-meter Power Cable - 1 x Screw Pack Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding. Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund. Custom Duties & Taxes 1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping. Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. On Apr 17, 2025 at 20:25:25 PDT, seller added the following information: On Jul 11, 2025 at 00:11:20 PDT, seller added the following information: