99 Gear Spot Welding Welder Machine Kit Support Battery Faraday Capacitor DIY US

Description

Store Categories Store Categories Other Product View Details Product Features: 18650 lithium spot welder, can weld 0.1-0.3mm, support 0.1-0.3mm thick nickel strip or steel strip Support Faraday capacitor, battery, welding solid 12 original MOS tubes, spot welding peak current up to 3600A 3 pulses, 99 levels of adjustment, simple operation and good effect Electrical conductivity and heat dissipation, can work continuously for a long time This version has a fan interface, when the temperature exceeds 45 degrees open The main board has a fixed button and display, easy to adjust Double-sided out of the line, easy to spot welding, the product is marked, not easy to connect the wrong, wider voltage wide selection of power supply welding more firmly and more widely Product parameters: Product name: 18650 lithium spot welder Working voltage: 6.5V-16V Working current:<20ma Standby power consumption:<0.5ma Recommended use temperature:-10-60℃ Welding peak current:3600A MAX Display language: Chinese and English can be switched: (press "-+" at the same time) Welding mode: default automatic welding mode Weld nickel thickness: 0.1-0.3mm (related to the battery discharge energy) Product size:120*96mm *14mm Instructions for use. 2.7V3000F Faraday capacitor two in series, when the charging voltage reaches 4.5V can be used. The highest gear adjustment section is 99 according to the thickness of the welded nickel sheet and the solidity of the weld in the "section" set the appropriate value. Battery power supply. 12V20AH~12V65AH. Note that when the battery capacity is larger, the stronger the discharge capacity, the new battery is stronger than the old battery discharge capacity. Therefore, we do not allow the capacity and the new degree of battery to choose the appropriate gear, it is recommended that the "- paragraph" when the first test do not adjust the gear too large, generally adjusted to 10 first spot welding a Bian to see the welding effect, according to the welding effect slowly upwards Attention: This product requires your own power supply, system voltage: 6.5V-16V, working current: 100-900A, support 12V 20AH ~ 12V 65AH. power supply equipment working current of about 100A ~ 900A, support 0.1-0.3mm nickel-plated sheet welding. Common working power supply in the market. 30Ah-35Ah capacity type 18650 battery pack 12V car starter power supply 2S/3S/4S model airplane lithium battery pack 3 string high rate lithium battery pack 2.7V 3000F Faraday capacitor two in series 12V-14.6V lead-acid battery 12V 30-65A good performance lead-acid bottle High rate lithium iron phosphate batteries Connection notes: 1. Connect the positive and negative battery poles according to the product connection schematic. 2. The soldering pen as well as the battery connection wire should be locked with a set screw so as not to lead to fire, welding is not secure. Caution: When we do not know the external Faraday capacitor or battery on the discharge capacity, please do not adjust the value of a large. Prevent excessive current damage to the field tube. Our products will be strictly tested before delivery, the product will cause unforeseen failures due to improper operation. So please be careful when using the operation, do not follow their own feelings go haphazardly use. Product list: 1* Spot welder 2* Spot welding pen 1* Negative wire 1* Screw accessories Shipping Policy Payment Method Returns Policy Shipping Policy Payment Method Returns Policy Home Payment Shipping About us Contact us Copyright©2018 datacaciques Home Payment Shipping About us Contact us Store Categories Store Categories Other Product View Details Product Features: 18650 lithium spot welder, can weld 0.1-0.3mm, support 0.1-0.3mm thick nickel strip or steel strip Support Faraday capacitor, battery, welding solid 12 original MOS tubes, spot welding peak current up to 3600A 3 pulses, 99 levels of adjustment, simple operation and good effect Electrical conductivity and heat dissipation, can work continuously for a long time This version has a fan interface, when the temperature exceeds 45 degrees open The main board has a fixed button and display, easy to adjust Double-sided out of the line, easy to spot welding, the product is marked, not easy to connect the wrong, wider voltage wide selection of power supply welding more firmly and more widely Product parameters: Product name: 18650 lithium spot welder Working voltage: 6.5V-16V Working current:<20ma Standby power consumption:<0.5ma Recommended use temperature:-10-60℃ Welding peak current:3600A MAX Display language: Chinese and English can be switched: (press "-+" at the same time) Welding mode: default automatic welding mode Weld nickel thickness: 0.1-0.3mm (related to the battery discharge energy) Product size:120*96mm *14mm Instructions for use. 2.7V3000F Faraday capacitor two in series, when the charging voltage reaches 4.5V can be used. The highest gear adjustment section is 99 according to the thickness of the welded nickel sheet and the solidity of the weld in the "section" set the appropriate value. Battery power supply. 12V20AH~12V65AH. Note that when the battery capacity is larger, the stronger the discharge capacity, the new battery is stronger than the old battery discharge capacity. Therefore, we do not allow the capacity and the new degree of battery to choose the appropriate gear, it is recommended that the "- paragraph" when the first test do not adjust the gear too large, generally adjusted to 10 first spot welding a Bian to see the welding effect, according to the welding effect slowly upwards Attention: This product requires your own power supply, system voltage: 6.5V-16V, working current: 100-900A, support 12V 20AH ~ 12V 65AH. power supply equipment working current of about 100A ~ 900A, support 0.1-0.3mm nickel-plated sheet welding. Common working power supply in the market. 30Ah-35Ah capacity type 18650 battery pack 12V car starter power supply 2S/3S/4S model airplane lithium battery pack 3 string high rate lithium battery pack 2.7V 3000F Faraday capacitor two in series 12V-14.6V lead-acid battery 12V 30-65A good performance lead-acid bottle High rate lithium iron phosphate batteries Connection notes: 1. Connect the positive and negative battery poles according to the product connection schematic. 2. The soldering pen as well as the battery connection wire should be locked with a set screw so as not to lead to fire, welding is not secure. Caution: When we do not know the external Faraday capacitor or battery on the discharge capacity, please do not adjust the value of a large. Prevent excessive current damage to the field tube. Our products will be strictly tested before delivery, the product will cause unforeseen failures due to improper operation. So please be careful when using the operation, do not follow their own feelings go haphazardly use. Product list: 1* Spot welder 2* Spot welding pen 1* Negative wire 1* Screw accessories Shipping Policy Payment Method Returns Policy Shipping Policy We will arrange shipping for you within 24 Hours after payment cleared except the holidays. -We ship items to Worldwide. Thank you! -we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries. Payment Method We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase. 2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country. Returns Policy 1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase. 2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse. 3. Please include your eBay ID and item number with any email requests.