67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67

67" Full-Auto Wide Format Cold Laminator Machine Heat Assisted&Trimmer 110V 60Hz

$ 2639.48

Heating method: cold & hot UPC: Does not apply gtin13: Does not apply Rated input voltage:: 110V 60Hz Material: Aluminium Control Type: Electronic Max laminating width: 65" (1650mm) Max laminating thickness: 1.89" (48mm) Product Size: 80.7''*27.55''*55.9'' Color: Black+White+Blue Country of Origin: China Weight: 573.2Ibs Max speed: 65 ft/min (20m/min) Enhance way: Pneumatic(Air pump) MPN: KL1700-T1 Brand: KILO Model: KL1700-T1

Description

67" Full-Auto Wide Format Cold Laminator Machine Heat Assisted & Trimmer - Pro duct Features: The Max laminating width of this product is 65inch (1650mm) The Max laminating thickness of this product is1.89 inch (48mm) The Max speed of this product is 65 ft/min (20m/min) Heating method is cold & hot, with digital display Descriptions Product Description KL1700-S1 is a full-auto wide format cold & hot roll laminator can finish wide format graphics up to 67 inches. Max laminating speed is 65 ft/min (20m/min), which is higher than other models. This laminator equipped with four trimers with micro-adjust structure ensures accurate cutting position. Infrared ray of safety deflector device, which makes sure the safety of the operator. There are operation buttons on KL1700-S1 laminator’s both front and back for easy operation. Product Details 1. Top and bottom rollers The top roll and bottom roll are one of the most important parts of the film covering machine, whose material is silica gel. Silica gel has the characteristics of high-temperature resistance, wear resistance, corrosion resistance, and non-sticky. 2. Drawing axis, film axis, paper axis, and finished product axis The four mandrels are composed of aluminum rods, aluminum heads, bearings, rubber strips, and other components. The outer diameter is controlled within 3 inches, which facilitates the loading and unloading of conventional film products on the market, such as yellow film, laminating film and so on. 3. Pneumatic switch and cylinder The pneumatic switch has upper, middle and lower three models. In the case of air in the equipment, the top roll can be lifted up, the top roll can be lowered down, and the middle gear can temporarily lock the air inflow and output. The cylinder type of this equipment is SDA50-30, which makes the lifting height of top roll more than 28 mm. 4. Emergency stop switch When the machine is in an emergency or dangerous state, the power supply can be cut off by the emergency stop switch and the equipment can be stopped to protect the safety of the person and equipment. 5. Cutters The use of cutting knife can make it possible to cut vertically and white edges at the same time in the process of film covering. 6. Tighten your grip The tightening handle is mainly used to adjust the tightening force of four mandrels. Before leaving the factory, the four handles have been debugged accordingly. Users can use them directly. The tightening force is increased by twisting clockwise; the tightening force is reduced by twisting counterclockwise. 7. Operation Panel. Applications: This laminator with heat-assisted can be widely used for pre-masking vinyl graphic, mount prints on the substrate, over laminating inkjet prints and so on. The cold laminator is used to after printing. Available for photographic, Ad. Shop and copy shop to do lamination work, adding a protective layer on books cover, photographic, color pages, documents, charts, drawings, indoor advertising products, etc. Parts List Host: 1 Drawing mandrel left bracket: 1 Drawing mandrel right bracket: 1 Frame foot: 2 Quartz tube: 2 Square tube (40-60): 2 Foot switch: 1 Oil-water separator: 1 Screw bag: 1 Manual: 1 Technical Parameters Model: KL1700-S1 Max Laminate width: 1650mm(65'') Max Laminate thickness: 48mm(1.9'') Laminate speed: 0-20 m/min (0-65.6 ft/min) Enhance way: Pneumatic(Air pump) Temperature range: 70℃ (158 ℉) Rated input voltage: 110V 60Hz Preheating time: 5-10min Heating way: Infrared heating Continuous power: 2000W Motor Power: 250W Trimmer Qty: 4 N.W./G.W.: 507.06kg/280kg (451.95lb/617.29lb) Packaging size: 234 x 86 x 80cm (92.13 x 33.86 x 31.50 inch) Package : 1 x Laminator Machine (As shown in the picture) Note: If you have problem of the item, please contact us before leaving a neutral or negative feedback, we will do our best to resolve the problem for you. Payment 1. We accept paypal and all forms of credit card. 2. Payment is required to be made within 7 days of ordering to avoid a UPI case. Shipping LTL 1. All items are dispatched from our domestic warehouse in CA, GA or NJ, America. 2. Under normal conditions, delivery will take between 3 and 8 working days after dispatch, depending on your location. Remote areas will required longer delivery time. 3. If you're given a tracking number, please use it to track the delivery status of your order. We regret that our warehouse is not accessible to the public. As such, we don't offer a pick-up option. 4. Please note: Some products maybe dispatched in more than one carton, they may arrive at different time. If you only received partial box please don't worry, contact us and we will tell you where are the rest packages. Returns We accept returns, Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return; 2. Your product was damaged during transit; 3. You wish to make a warranty claim for any product you have purchase; 4. You're not satisfied with any product that you have purchased. Please note all returns must be directed to through Customer Service, please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees will be deducted from your refund incases where you changed your mind and wish to return the product. This also applies to order cancelled while in transit

  1. The Delivery Driver for Estes was Excellent A+++. His name was Paulie what a nice guy…true gentleman and a genuine professional at his career. On time delivery he called before to make sure I was ready to receive the shipment….All of the above with a smile and genuine great personality….A++++…..Way to go Paulie!!! Respectfully Ronnie Voeglie

    ajk05e25fe38

  2. Container cover looks to be of good quality. Shipping was slow, but not sellers fault! It was on its way after a day or 2, middle man dropped the ball, but end shipper got it delivered as promised in my appointment window. Overall I'd buy from seller again, as he was persistent and did a great job following up thru the delivery delays.

    Makhayama154

  3. Haven't received last box yet, arriving sometime today, cartons seem to be packed very well, comes in 5 boxes and they are definitely heavy!!I'll leave more feedback after it's built and anchored down.

    Virat Singh5

Related products