2 Point Bolt Mortise Lock Body Replacement Parts Fit Pella Storm Door Handleset
$ 22.52
Description
If your storm door latch assembly is broken, latches or deadbolt won't slide out or retract completely, simply get a new 2 point bolt mortise lock body instead of replacing the strom door or handle. This lock body is suitable for Pella Storm Door Handleset (Part No. 305014), Strike Plate for Pella 2-Bolt Mortise Lock (Part No. 305018) and models similar to them. 2-bolt mortise lock design with 2-point locking mechanism, and the locks can be equipped with a key lock for added security when needed 【Replace Old Lock Body】: If your storm door latch assembly is broken, latches or deadbolt won't slide out or retract completely, simply get a new 2 point bolt mortise lock body instead of replacing the strom door or handle. This lock body is suitable for Pella Storm Door Handleset (Part No. 305014), Strike Plate for Pella 2-Bolt Mortise Lock (Part No. 305018) and models similar to them 【Security】: 2-bolt mortise lock design with 2-point locking mechanism, and the locks can be equipped with a key lock for added security when needed 【Size Guide】: Bolts are 2-1/2 inches apart; Overall faceplate length: 8-1/2 inches; Faceplate width: 53/64"; Installation screw holes: 7-5/16 inches ; Center of handle to center of cylinder: 2-5/8 inches 【Easy Installation】: Insert the lock by aligning the triangular plastic positioner on the lock with the half-moon notch on the side of the mortise hole. There are 4 spring tabs that hold the mortise lock in the storm door, even with the panel screws not yet in place. Use a standard screwdriver and the spring tabs will retract when removing lock body. Put a piece of cardboard between screwdriver and door to prevent marring or chipping paint [Package Includes]: 2 point bolt mortise lock body black x 1, flat head screw x 2, hole plug x 1, triangular positioner x 1, allen wrench x 1
Perfect fit for replacement…